Auger Feeder Drilling Waste Management Equipment Screw Auger Feeder SS316L

Description of APLS auger feeder/ screw conveyor

APLS Auger feeder/ Screw conveyor is popular in the oil gas industry for transferring the drilling cuttings to feed to the cuttings dryer, and cuttings collection box. Screw Conveyor is designed for transporting mud cuttings, providing an effective and low-cost drilling cuttings transport system for offshore and onshore drilling rigs. It's a combination of motor and gearbox, the screw blade, and the U shape or circular channel. A U-shaped screw conveyor is a type of screw conveyor.

The Screw Conveyor is designed to transport drilling waste from one point to another safely and efficiently. This is achieved by the use of a scroll and impeller, which is rotated inside a trough by an electric motor. Drilling waste is fed into the Screw Conveyor and transported along by the rotating scroll. The waste is then offloaded by means of a chute when it reaches the end of the Screw Conveyor. The scroll is sealed inside the trough by a hinged metal lid which is bolted down for increased safety.

Furthermore, AIPU Solids Control can also make a VFD control panel for fixed speed screw conveyor. The explosion-proof standard can be fully CNEX, IECEx, or ATEX Zone 1 and Zone 2 Rated and suits for 460V/60HZ 3 Phase, 480V/60HZ 3 Phase, 380V/HZ 3 Phase, or suits customized power systems. Clients confirm voltage and HZ before ordering.

The production is manufactured according to the DIN15261-1986 standard, and the design conforms to the professional standard of JB / T7679-2008 "Screw Conveyor". U-shaped screw conveyor is widely used in food, chemical, building materials, metallurgy, mining, electric power, and other departments, mainly used for conveying small granular, powdery, small lump materials. It is not suitable for conveying materials that are easy to deteriorate, have a high viscosity and easy to agglomerate, and have large water content. The auger feeder is another reference to the screw conveyor. There are fixed speed and VFD ones. For the design, there are horizontal with 0° incline or a certain angle according to clients' requirements. The difference will be the leg height at the ends.

Technical specification of APLS auger feeder/ screw conveyor

Screw Conveyor is commonly known as Auger, it is widely used conveyor equipment. Compared with other conveyor equipment, it has the advantages of small size, good sealing, stable and reliable operation, many discharge loads and unloads safe operation, and easy maintenance.

The flights of screw conveyors adopt wear-resistant material, screw diameter from 250mm to 500mm, the length from 4 meters to tens of meters, 0.5 meters every gear, according to transport the material characteristics to choose a shaft or a shaftless screw conveyor.

What is the structure of the auger feeder?

It includes but is not limited to the following items. The motor, the gearbox, the coupling, the channel, the impeller or blade, the grade or sheet cover, the support leg, or the frame. If necessary, there is a control panel.

Some clients need the screw conveyor to perform at variable frequencies. The VFD can be achieved by the control panel, also can be achieved in a mechanical way. Based on different clients' preferences, there are horizontal direction gearbox and vertical direction gearbox. The gearbox can be the helical bevel or the helical worm and wheel type.

Why do we need the auger feeder?

The drilling cuttings waste or the drilling fluids disposal discharged from solids control equipment need to be treated for the further drying process. The screw conveyor will help to transfer the disposal to a certain pit, cuttings dryer, or the filter press machine. For example, the auger feeder is set beside the tank and below the shaker discharge end. The auger feeder inlet position or channel beginning part can be fitted with a hopper in parallel to the discharge slide channel 

Auger Feeder / Screw conveyor can help us get a convenient transfer drilling cutting and waste between equipment to further treatment center for the drilling waste. The auger feeder is not only used in oilfield waste management but also in other applications. Such as the chemical industry, construction industry, food industry, mining industry, and so on. The angle of the conveyor is customizable for the different work sites. For cuttings transfer, we usually use U type conveyor and a round tube-type conveyor.

Why use the APLS Auger feeder/screw conveyor?

As a professional manufacturer of solids control, we know better about the job site. We know how to design and configure an auger feeder is more convenient for users' operations. And from the raw material of steel to the different standard components (motors, gearbox) we select the high quality and excellent performance product

AIPU provides an optimal proposal for all the clients. Most of our orders place repeat orders of the reliable quality and stable performance. If you don't select us you may face risks of the higher cost of operation or maintenance.

APLS Auger Feeder / Screw Conveyor features

• Compact design with a small footprint.
• Tight seal.
• Stable and reliable performance.
• Flexible design on input and output port.
• Easy to operate and maintain.
• Gearbox and motor are top brands with high quality.
• Custom-built available per actual requirement.

For any questions or demands, please feel free to contact AIPU solids. You will get a free offer on an optimal solution, you will get a professional proposal very soon.